Spaceship
UNDER CONSTRUCTION
Spaceships are powerful vehicles that can launch any contained structures, items, and players into space, then fly around the solar system to land on other surfaces. A well designed spaceship can even fly the huge distances between stars and other deep space points of interest.
Spaceships are an advanced form of interplanetary logistics, and can transport many items between surfaces more cheaply than other logistic solutions, the material and technology cost required to build spaceships is much higher.
Your first spaceships will be quite small, but the maximum size can be increased by technology. Additionally, you can research more powerful engines to increase your spaceship's speed.
Spaceship Parts & Construction
Spaceships are made from many tiles and smaller components that fit together to make a spaceship of your own design. You design a spaceship almost like a mini moveable base.
Start with a floorplan of spaceship flooring. Don't build too big, as your first few spaceships will have strict size restrictions, expandable by research. Place spaceship walls around the edges to make bulkheads, and make sure there are no gaps (including diagonals). Place a spaceship console somewhere in the inside, this is the core part of the spaceship and how you control it. When the console is placed, there are some pulses as the console figures out what parts are properly attached, what parts are properly contained and what will fall off if you try to launch. If any squares flash red, then there is an issue with your design, which you can diagnose by checking the spaceship console. You also need a spaceship rocket booster tank, and a spaceship rocket engine. The booster tank is what stores the fuel you need to get into space and provides the VTOL component. The rocket engines are for the slower burn through space to get you to your destination. Some form of defence in the front (always north) is also advisable because the nebula you are in is full of debris.
Streamlining
This area of space is in a gritty nebula. If you streamline your spaceship you can improve you spaceship's maximum speed by around 30%. Making a flat box front should be avoided, but don't need to build a wedge. Up to 1/3 of your spaceship's front can be flat with no penalty. Circular shapes should also be fine. You can manually trigger an integrity check to see how the streamlining is going.
Crafting Machines
Warning: A crafting machine designed for space will only be able to use recipes shared by other land structures if the spaceship is on land. If a space-based recipe is set while the spaceship lands, the ingredients will be lost. Some land-based crafting machines can function in space, but they will lose the ability to use productivity modules while in space. If the spaceship launches with productivity modules in these machines, the productivity modules are destroyed.
Integrity
Early on, you will be very limited on spaceship size by the Integrity Stress limits of your technology level. Additional technology lets you build larger spaceships. Integrity stress is calculated in 2 parts:
- Part A. Hull stress mainly based on the size and shape of the ship.
- Part B. Container stress based on the item and fluid storage capacity of the ship.
The total integrity stress is whichever stress factor is larger, the two values are not added together. If your structural stress is 250 and your container stress is 280, the integrity stress will be 280.
The Hull stress bar shows 3 values. The first is the current discounted hull stress based on empty spaceship tiles. Up to 10% of a ship's size does not count towards integrity stress if it is empty spaceship tiles. This clear space is discounted in the stress calculation and is useful for corridors. The second value is the hull stress with no discount and is useful to estimate the ship stress value you would have if you fill the interior with structures. The third value is the max stress your tech level will allow.
Exceptionally long thin ships, or ships with very thin sections in the middle are less sturdy than more rotund designs. Wide ships are sturdy but must clear more asteroids.
Some structures have special effects on the ship integrity or speed, such as the Nexus.
Propulsion
Engines
Boosters
Speed
Ship speed is based on the thrust of the engines vs the ship weight (approximated by integrity stress). Engines can be placed in/on the ship, but engines at the back of the ship with empty space behind are more effective. Fully enclosed engines are 60% effective. Engines at the edge of the ship also have a slight advantage.
You can set a target speed for the ship to aim for. If the ship exceeds the target speed then it will start disabling engines to more closely match the target speed and save fuel. There are 3 speed limit options, so you can further reduce your speed for high asteroid areas that might otherwise overwhelm your defences.
Automation
Console
The top right section of the spaceship console can be connected with wires separately from the main structure, as it outputs its own signals: [img=item/se-spaceship-console] The console number indicates the spaceship's ID. [img=virtual-signal/signal-speed] The speed signal number indicates the spaceship's speed: -1 if stopped, -2 if anchored. [img=virtual-signal/signal-distance] The distance signal indicates the distance to the selected destination: -1 if arrived, -2 if anchored, -3 if no destination is set. [img=virtual-signal/se-planet-orbit] A fourth signal indicates the current destination, if any. [img=virtual-signal/signal-D] Certain parts of space have more or less asteroids that your ship will encounter. The density of asteroids where the ship is currently positioned is indicated with the D signal. [img=virtual-signal/signal-A] If the spaceship is anchored then it indicates the anchored zone id with the A signal.
[font=heading-2][color=#ffe6c0]Spaceship Automation[/color][/font]
The main structure of the console can accept signal inputs on the left side:
[img=virtual-signal/signal-speed] The speed signal sets a target speed and engages the engines. A negative signal stops the engines instead.
[img=virtual-signal/se-spaceship-launch] A positive Spaceship launch signal triggers a launch.
[img=virtual-signal/se-planet-orbit] A destination signal sets the destination (you can see a zone's signal from the Universe Explorer side panel once you have constructed a spaceship).
Note: Both the destination signal's type (ex. [img=virtual-signal/se-planet-orbit] or [img=virtual-signal/se-asteroid-belt]) and the signal's value/id must match for the destination to be set.
Note: A spaceship console will not accept [img=virtual-signal/se-spaceship-launch] Launch or [img=virtual-signal/signal-speed] Speed inputs until a player has manually launched and engaged the ship at least once. This is to prevent blueprinted spaceships from accidentally launching while still in the middle of being built by bots.
Note: The console only checks for changes to the input signal every second; a sustained signal is required for the ship to react, single tick pulses will not work.
Docking Clamps
n[font=heading-2][color=#ffe6c0]Circuit Signal Passthrough[/color][/font] \nSpaceship clamps have a power and circuit network connection point in their upper corner. When clamps are connected during automatic landing, the power and circuit network signals are joined, allowing for power and circuit signals to be passed between the ship and the landing location.
\n[font=heading-2][color=#ffe6c0]Automatic Landing[/color][/font]
\nTo cause a spaceship to land, the console must be given a pair of anchor signals, either:
\n"anchor using left clamp" ([img=virtual-signal/se-anchor-using-left-clamp]) with "anchor to right clamp" ([img=virtual-signal/se-anchor-to-right-clamp])
\n"anchor using right clamp" ([img=virtual-signal/se-anchor-using-right-clamp]) with "anchor to left clamp" ([img=virtual-signal/se-anchor-to-left-clamp])
\nThe value of the "anchor using ..." signal must match the value of a clamp on the ship.
\nThe value of the "anchor to ..." signal must match the value of a clamp at the destination.
\nYou can see and change these values on clamps by opening a clamp's UI. If a match is found for both the "anchor using ..." and "anchor to ..." signals given to the ship console, then the ship will try to land with the two clamps connected. Use with caution.
\n[font=heading-2][color=#ffe6c0]Clamps[/color][/font]
\nTo set the ID of a clamp, open the clamp GUI and change the numeric value of the clamp signal to the ID you wish for the clamp to have. You never need to change the type of the clamp signal.
\nYou can disable an anchored clamp by passing it a red signal.
\n[font=heading-2][color=#ffe6c0]Landing Example[/color][/font]
\nThe spaceship has a left-clamp with ID 315. In that clamp's GUI the signal is [img=virtual-signal/se-anchor-using-left-clamp] with a value of 315.
\nThe landing surface has a right-clamp with ID 147. In that clamp's GUI the signal is [img=virtual-signal/se-anchor-using-right-clamp] with a value of 147.
\nIn order to get the spaceship to land using those two clamps, the left side of the ship console must be passed the following signals:
\n[img=virtual-signal/se-anchor-using-left-clamp] 315
\n[img=virtual-signal/se-anchor-to-right-clamp] 147